In RGB/RGBA profiles, the minimum value for each channel will turn the corresponding LED off, meaning that if all those channels are at 50%, the light will be at 50% intensity. (Step 1 continued after table) Note: You will only be able to dim third-party lighting controlled by DMX if you choose an RGB/RGBA profile or any profile with an intensity parameter (‘I’ or “Masteri”). When selecting a profile, reference the table below as a key to the profile parameters. The name will help you identify the profile later on when adding it to groups. Set the profile and channel range, then give the profile a descriptive name. On the DMX Output tab, select an N3 Satellite to configure. Open the installation in Ketra Tech Tool.
Assign the scene to an input source, i.e., a HomeWorks QS keypad button, Ketra keypad button, contact-closure input, or time trigger in a show. Customize each group as part of a scene in Design Studio.Ĥ. Sort each profile into a Ketra group in Design Studio.ģ. Configure profile ranges for DMX output in Ketra Tech Tool.Ģ. Not including wiring, the workflow is as follows:ġ.
An example application would be that when a user presses Scene 2 on a Ketra or HomeWorks QS keypad, the N3 Satellite sends out 0, 119, and 255 for an RGB profile on channels 1-3 this would cause any RGB-enabled receivers listening to those channels to go to an aqua color. It will refresh the receivers’ settings at a rate of 44 Hz (i.e., 44 times per second) to ensure quick correction of any transmission errors.įor every scene in the installation, you can define specific output settings for each DMX profile range.
#Pixelconduit dmx output full#
The N3 can output a full universe of DMX-512A using a variety of profiles. Publishing: Saving Configurations to DevicesĪppendix A: Integrating Ketra Products into HomeWorks QS SystemsĪppendix B: DMX Control Support with KetraĭMX Output Note: The N3 Satellite can be configured for DMX output in both Ketra Only and Ketra with HomeWorks QS installations.Īn N3 Satellite properly configured for DMX output enables the Ketra system to control third-party lighting and other devices.
0 kommentar(er)
